Insulate – 1SG113 SURGICAL GOWNS AAMI Level 3 Gowns




Basic Care
Intensive Care
Insulate
Polyfilm Insulate
Fabric Insulate
Armour
Poly Armour
Serene


AAMI Level 3 Gown

Satisfies EN13795 High Performance.

Manufactured as per Association for the Advancement of Medical Instrumentation (AAMI) standards.

Insulate

– 1SG113

“Companion in that Decisive moment, Level 3 Gown helps you to take spontaneous actions in your procedures. A requisite of A&E Departments and Labs.”

Worn by health professionals during Moderately critical medical procedures,to be used, for example, during arterial blood draw, inserting an Intravenous (IV) line, in the EmergencyRoom, or for trauma cases.

Non-reinforced, for low to moderate fluid contact

Soft, Lightweight, skin-friendly Material Used.

Made of SMS Non-Woven Fabric, Premium Quality Fabric used.

AAMI Level 3 Polyfilm Reinforced Gown

Satisfies EN13795 High Performance.

Manufactured as per Association for the Advancement of Medical Instrumentation (AAMI) standards.

Polyfilm Insulate

– 1SG114

“Stay under the Radar of protection, Polyfilm Insulate equips you to handle all those dramatic situations in your career as a health professional. The polyfilm reinforcement in the Critical Areas relieves the concern of Fluid Splash.”

Worn by health professionals during critical medical procedures,to be used, for example, during arterial blood draw, inserting an Intravenous (IV) line, in the EmergencyRoom, or for trauma cases.

Critical Area Reinforced for Moderate Fluid Contact and Protection

Soft, Lightweight, skin-friendly Material Used

Made of SMS Non-Woven Fabric,Polyfilm Reinforced, Premium Quality Fabric used.




Critical Area in Gown

AAMI Level 3 procedures


AAMI Level 3 Fabric Reinforced Gown

Satisfies EN13795 High Performance.

Manufactured as per Association for the Advancement of Medical Instrumentation (AAMI) standards.

Reinforced Insulate

– 1SG115

“Adding an extra level of safety, Fabric reinforced Level 3 Gown could bring reassurance to your safety concerns.”

Worn by health professionals during critical medical procedures be used, for example, during arterial blood draw, inserting an Intravenous (IV) line, in the Emergency Room, or for trauma cases.

Critical Areas Reinforced for Moderate Fluid Contact and Protection.

Soft, Lightweight, skin-friendly Material Used.

Made of SMS Non-Woven Fabric, Fabric Reinforced, Premium Quality Fabric used.

Details
Product Measurement and Spec
Details

Aavvie® Healthwear™ products are tested for and meet the AAMI Level 3 standard, European Standard: EN13795 High Performance
-Suggested guidelines are not a substitute for clinician professional judgment and experience.

AAMI levels determined by ANSI/AAMI PB70:2012

Adopted by the U.S. Food and Drug Administration (FDA)

Product Measurement and Spec

Size Chart

Size (In cm) Length Girth
Medium (M) 125 150
Large (L) 135 155
Extra Large (XL) 145 165
Extra Extra Large 155 165

Specs

Colour Blue | Yellow
Material SMS | SMMS | SSMMS
Reinforced Fabric | Poly film

Testing in AAMI Level 3

AAMI has identified American Association of Textile Chemists and Colorists (AATCC) 42 and AATCC 127 as the key test requirements that a surgical gown must pass in order to be labeled AAMI Level 3.

AATCC 42- Water Impact penetration Test

AATCC Defines: Impact penetration tests measure the resistance of fabrics to the penetration of water by impact. The test was developed to predict the probable rain penetration resistance of a fabric and most methods still include this language in the scope. The test has also been adopted by the medical industry as a measure of liquid barrier performance for protective apparel and drapes

AATCC 127- Hydrostatic pressure Test

AATCC Defines: Hydrostatic Pressure Test measures the resistance of a fabric to the penetration of water under hydrostatic pressure. It is applicable to all types of fabrics, including those treated with a water resistant or water repellent finish. Water resistance depends on the repellency of the fibers and yarns, as well as the fabric construction. The results obtained by this method may not be the same as the results obtained by the AATCC methods for resistance to rain or water spray.

Testing in European Standards

EN13795- High-Performance

EN13795- High Performance/Critical Areas Tests

– Resistance to microbial Penetration – Dry, Wet
– Cleanliness – Microbial, Particulate Matter
– Linting
– Water Resistance Hydro head
– Resistance to Liquid Penetration
– Bursting Strength – Dry, Wet
– Tensile Strength –Dry, Wet
– Breathability

Download Brochure

How to buy

Reach out to our team for ordering information.

Customer Relation:
For Product availability, Specification, Customization, More info etc.


Enquire Now


Request Call Back

All Products and Packs are customized according to Hospital requirements.